Turn Signals - Yamaha FZ6R Forums - International FZ6R / XJ6 Motorcycle Community Forum

**Professional_Noob** · 12-22-2009, 06:19 PM

Howdy, so I decided on some turn signals,the Lockhart Phillips short stalks, but my problem is the light spacers, they don't make them for our bike! Any of you motorcycle Gurus know if these would work!? Appreciate the help!

Lockhart Phillips Rear Marker Light Spacers for YZF-R1 02-06 - Taillights, Lighting & LEDs - Solo Moto Parts

r0bot · 12-23-2009, 10:57 AM

i can't say for sure, but i know the flush mounts i installed and a lot of others installed were designed for the 02-06 R1 series and they fit perfectly.

cbzdel · 12-23-2009, 11:03 AM

my flush mounts fit an R1 so I am sure these should fit, if you get them at a cycle gear they have a no hassle return policy.

vitrox · 12-23-2009, 10:24 PM

my 08 r1 and 09 fz6r have the same turn signals + mounts.

YamaDon · 12-26-2009, 09:25 PM

Quote:

Originally Posted by Professional_Noob

Howdy, so I decided on some turn signals,the Lockhart Phillips short stalks, but my problem is the light spacers, they don't make them for our bike! Any of you motorcycle Gurus know if these would work!? Appreciate the help!

Lockhart Phillips Rear Marker Light Spacers for YZF-R1 02-06 - Taillights, Lighting & LEDs - Solo Moto Parts

Front or rear signals? The Targa rear fender eliminator includes signals that are very bright and no spacers needed. As for the front, I went with Protons(best there is, even considering the price) and LOVE them! Look and fit is great, and are quite bright. Had to replace the flasher relay with an LP LED relay (about $13.00).

cbzdel · 12-28-2009, 11:45 AM

what makes the proton flush mounts the best?

hannant12 · 01-06-2010, 07:14 PM

anyone know how to wire them up?

**Professional_Noob** · 01-07-2010, 07:36 PM

Quote:

Originally Posted by hannant12

anyone know how to wire them up?

I'm still waiting on all the parts to come in! They sent the all the wires and crap last week, the turn signals this week and I'm still waiting on the spacers! Whenever it all comes in I will atempt a write up if all went well! If I failed then, you will not get one!

**Professional_Noob** · 01-19-2010, 09:29 PM

I'm getting annoyed! I have been waiting on the spacers for my turn signals since Dec 24! I can't install my signals without them! I have wrote Lockhart and Phillips three times already and they haven't replied! I hate waiting on parts!

Pizz · 02-01-2010, 06:22 PM

I bought a set of these and it doesn't look like there are enough parts to install. There is no rubber mount or wiring diagram. F!

12-22-2009, 06:19 PM	#1 (permalink)
Professional_Noob Senior Member Bike: FZ6R Join Date: May 2009 Location: Fort Benning, GA Posts: 198 Thanks: 38 Thanked 47 Times in 27 Posts	Turn Signals Howdy, so I decided on some turn signals,the Lockhart Phillips short stalks, but my problem is the light spacers, they don't make them for our bike! Any of you motorcycle Gurus know if these would work!? Appreciate the help! Lockhart Phillips Rear Marker Light Spacers for YZF-R1 02-06 - Taillights, Lighting & LEDs - Solo Moto Parts Last edited by Professional_Noob; 12-22-2009 at 06:34 PM.

12-23-2009, 10:57 AM	#2 (permalink)
r0bot Member Bike: Yamaha 2009 FZ6R Join Date: Apr 2009 Location: Escondido CA Posts: 43 Thanks: 2 Thanked 2 Times in 2 Posts	i can't say for sure, but i know the flush mounts i installed and a lot of others installed were designed for the 02-06 R1 series and they fit perfectly. __________________ Daryl _____________________________ 2009 Yamaha Raven Black FZ6R _____________________________ Mods: Flush Mount front blinkers, White wheel tape (not yet installed)

12-23-2009, 11:03 AM	#3 (permalink)
cbzdel Super Moderator Bike: 2009 FZ6R Join Date: May 2009 Location: Tacoma, WA Posts: 1,061 Thanks: 37 Thanked 222 Times in 105 Posts	my flush mounts fit an R1 so I am sure these should fit, if you get them at a cycle gear they have a no hassle return policy. __________________ 2009 De-Badged Raven FZ6R Mods: Intuitive Racing Sliders // Competition Werkes FE // Camcorder & GPS Mounts // Motrax Flush Mounts // Pazzo Shorties // K&N Air & Oil Filters // 6000k HID Kit // Red Wheel Stripes // Tank Slapper Kit // Oberon Fuel Tank Cap / /Axio Tail Bag // +1 Front Sprocket // Integrated Smoked LED Tail Light //

12-28-2009, 11:45 AM	#6 (permalink)
cbzdel Super Moderator Bike: 2009 FZ6R Join Date: May 2009 Location: Tacoma, WA Posts: 1,061 Thanks: 37 Thanked 222 Times in 105 Posts	what makes the proton flush mounts the best? __________________ 2009 De-Badged Raven FZ6R Mods: Intuitive Racing Sliders // Competition Werkes FE // Camcorder & GPS Mounts // Motrax Flush Mounts // Pazzo Shorties // K&N Air & Oil Filters // 6000k HID Kit // Red Wheel Stripes // Tank Slapper Kit // Oberon Fuel Tank Cap / /Axio Tail Bag // +1 Front Sprocket // Integrated Smoked LED Tail Light //

01-06-2010, 07:14 PM	#7 (permalink)
hannant12 Junior Member Bike: yamaha fz6r Join Date: Jan 2010 Location: chesapeake, OH Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	installing proton flushmount turn signals? anyone know how to wire them up?

12-23-2009, 10:24 PM	#4 (permalink)
vitrox Senior Member Bike: 2008 R1, 2009 FZ6R, 2010 BMW S1000RR Join Date: Nov 2009 Location: fairbanks, ak Posts: 217 Thanks: 3 Thanked 63 Times in 37 Posts	my 08 r1 and 09 fz6r have the same turn signals + mounts.

01-19-2010, 09:29 PM	#9 (permalink)
Professional_Noob Senior Member Bike: FZ6R Join Date: May 2009 Location: Fort Benning, GA Posts: 198 Thanks: 38 Thanked 47 Times in 27 Posts	I'm getting annoyed! I have been waiting on the spacers for my turn signals since Dec 24! I can't install my signals without them! I have wrote Lockhart and Phillips three times already and they haven't replied! I hate waiting on parts! __________________ 09 Raven FZ6R - Yamaha Double Bubble Screen - Bar ends - Seat Cowl - Competition Werkes FE - LP Short Stalk turn signals - Evotech Swingarm Spools - Frame Sliders (Fairing Cut) - Speedo Healer - Pazzo Racing Levers (Shorty) - K&N Air Filter - Graves AIS Block Off Plates - EK chain (Black) - Driven Sprockets (Black) -1 Front, +2 Rear - Puig Rear Hugger - Heal Tech Gear Indicator - TBR Full Exhaust System (A PCV and AutoTuner waiting for install) *On the way- A drained bank account!

02-01-2010, 06:22 PM	#10 (permalink)
Pizz Member Bike: FZ6R, Ninja 1000 Join Date: Jan 2010 Location: Edmonton Posts: 92 Thanks: 8 Thanked 53 Times in 23 Posts	I bought a set of these and it doesn't look like there are enough parts to install. There is no rubber mount or wiring diagram. F!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Help Contribute to Yamaha FZ6R Forums - International FZ6R Motorcycle Community Forum
Please support and help grow this great community by donating to any of the below Goals
General [ Loading Progress Bar ] Donate Now