sunk in turn signals - Yamaha FZ6R Forums - International FZ6R / XJ6 Motorcycle Community Forum

mchury · 10-20-2009, 06:16 PM

These are my turn signals. They are sunk in untill the actual signal is touching the ferring. This mod is free, takes about an hour, and isnt to hard to do if you. I think it deff looks better than stock and didnt cost a dime.

fz6rwolf · 10-20-2009, 06:37 PM

Looks good

FZ1inNH · 10-20-2009, 07:22 PM

It's not yours. It's not that you modded them. It's just the stock Yamaha turn signals are horrible to me. I hope to replace mine with the Watsen Flush mounts some day soon!

But, I will add that I don't like the new shorter look either. Sorry!

mchury · 10-20-2009, 07:34 PM

Quote:

Originally Posted by FZ1inNH

It's not yours. It's not that you modded them. It's just the stock Yamaha turn signals are horrible to me. I hope to replace mine with the Watsen Flush mounts some day soon!

But, I will add that I don't like the new shorter look either. Sorry!

no need to be sorry. thats why i put em on here. to get honest opinions. thanks for the feed back

jspansel · 10-21-2009, 06:27 AM

I like. I was actually looking to do that same thing. Take the bottom part of the stock off. Then build a little plate and run the screw through that to mount it.

Got any farther away pics?

Craxican · 10-21-2009, 09:46 AM

Nice...definitely visible, but i already bought my Proton Flushmounts

...still cool though

cbzdel · 10-21-2009, 04:30 PM

Better... BUT its still stock lights which I never liked..

But it is an improvement!

mchury · 10-21-2009, 09:09 PM

Quote:

Originally Posted by jspansel

I like. I was actually looking to do that same thing. Take the bottom part of the stock off. Then build a little plate and run the screw through that to mount it.

Got any farther away pics?

u dont even need to make a plate. There is a small metal piece in the stock piece u can use after u take the stem off. I dont have any other further pics as of now. I will take some soon for you tho.

mchury · 10-21-2009, 09:10 PM

Quote:

Originally Posted by cbzdel

Better... BUT its still stock lights which I never liked..

But it is an improvement!

yea i agree they dont look good as flushmounts or an aftermarket light. I just wanted to see what i could do with what i got and not spend alot of money.

jspansel · 10-22-2009, 06:08 AM

Quote:

Originally Posted by mchury

u dont even need to make a plate. There is a small metal piece in the stock piece u can use after u take the stem off. I dont have any other further pics as of now. I will take some soon for you tho.

Even better! I will probably do this soon.

View Poll Results: How do the sunk in turnies look?
Worse than stock	4	15.38%
Better than stock	22	84.62%
Voters: 26. You may not vote on this poll

10-20-2009, 06:37 PM	#2 (permalink)
fz6rwolf Senior Member Bike: FZ6R Join Date: Mar 2009 Location: Rhode Island Posts: 504 Thanks: 41 Thanked 33 Times in 24 Posts	Looks good __________________ "Be nice, until it's time not to be nice" (Roadhouse) Cortech saddlebags, tank bag, decals removed. Someday hardcase bags, aftermarket touring windshield to be light sport-tourer. Ride whenever you can, it's better therapy than medications!!!

10-21-2009, 06:27 AM	#5 (permalink)
jspansel Super Moderator Bike: 09 R6 Raven Join Date: Jul 2009 Location: Bend, OR Posts: 2,548 Thanks: 984 Thanked 1,180 Times in 624 Posts Blog Entries: 17	I like. I was actually looking to do that same thing. Take the bottom part of the stock off. Then build a little plate and run the screw through that to mount it. Got any farther away pics? __________________ -Jay Don't cage me, bro! -But you can REP me!!! I intend to live forever. So far, so good...

10-21-2009, 09:46 AM	#6 (permalink)
Craxican Senior Member Bike: Cadmium Yellow FZ6R Join Date: Sep 2009 Location: Pensacola Posts: 256 Thanks: 60 Thanked 35 Times in 25 Posts	Nice...definitely visible, but i already bought my Proton Flushmounts...still cool though

10-21-2009, 04:30 PM	#7 (permalink)
cbzdel Super Moderator Bike: 2009 FZ6R Join Date: May 2009 Location: Tacoma, WA Posts: 1,061 Thanks: 37 Thanked 222 Times in 105 Posts	Better... BUT its still stock lights which I never liked.. But it is an improvement! __________________ 2009 De-Badged Raven FZ6R Mods: Intuitive Racing Sliders // Competition Werkes FE // Camcorder & GPS Mounts // Motrax Flush Mounts // Pazzo Shorties // K&N Air & Oil Filters // 6000k HID Kit // Red Wheel Stripes // Tank Slapper Kit // Oberon Fuel Tank Cap / /Axio Tail Bag // +1 Front Sprocket // Integrated Smoked LED Tail Light //

10-20-2009, 07:22 PM	#3 (permalink)
FZ1inNH Super Moderator Bike: 2009 FZ1 Join Date: Jul 2009 Location: Dover, NH Posts: 569 Thanks: 346 Thanked 321 Times in 152 Posts	It's not yours. It's not that you modded them. It's just the stock Yamaha turn signals are horrible to me. I hope to replace mine with the Watsen Flush mounts some day soon! But, I will add that I don't like the new shorter look either. Sorry!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode