starting problem - Yamaha FZ6R Forums - International FZ6R / XJ6 Motorcycle Community Forum

rsx2002 · 01-13-2010, 03:18 PM

i just installed my r6 headers put in a k and filter and have an hmf r6 exhaust system. i have the pcv installed and have the autotune. everything ran great. however i put everything back together put my plastics on and started the bike it ran for like 3 mins if that and just shut off.. now my bike wont even start. it just cranks and cranks and crack it may kick over once or twice but it wont start.. what could be the problem anyone have this problem yet ? pleas help

KADO · 01-13-2010, 03:52 PM

Sounds like it may not be grounded all the way. Have u checked to make sure that the PC V is grounded?

rsx2002 · 01-13-2010, 03:57 PM

ya everything is grounded correctly. i had the bike started before i put the plastics back on..from putting the plastics on and starting it back up was less then 20 mins. its started up ran for like 2 mins then jsut shut off now it wont start....i didnt think it could be flooded but is that a possibility cause i can kinda smell fuel comin from the tail pipe...idk what else is would be if it started before now it dont..something dont add up...its ran ever since i put everything on...just after i put on the plastics it wont start ha..

FitZ6R · 01-13-2010, 05:21 PM

Where are ya in PA?

rsx2002 · 01-13-2010, 05:30 PM

clarion area.. im like 10mins from clarion and an hr from pittsburgh

KADO · 01-13-2010, 06:23 PM

what color lights show up on the power commander module when u try and start the bike?

rsx2002 · 01-13-2010, 06:29 PM

green and the red blinks then goes out

KADO · 01-13-2010, 06:33 PM

Quote:

Originally Posted by rsx2002

green and the red blinks then goes out

I found this on the power commander website:
The bike is starting and then dying with the ignition module plugged in.

Make sure that the ignition module is communicating with the bike by showing a green indicator light on the front of the module once the bike is started. If the light is red, connections may need to be checked. The module should show green as soon as the bike is running which will show communication with the bike. Reloading firmware may also help.

rsx2002 · 01-13-2010, 06:36 PM

well when i plug the pcv in everything is been read right when i hit the starter the rpm and duty % changes on the computer so i know everything is working correctly im just tryin to think of how its gettin flooded ?

KADO · 01-13-2010, 06:42 PM

The only thing that I can thing of is that the connectors to the injectors by the fuel rail may be faulty or something of that nature but I could be completely wrong.

01-13-2010, 03:18 PM	#1 (permalink)
rsx2002 Junior Member Bike: 2009 fz6r Join Date: Dec 2009 Location: pa Posts: 18 Thanks: 0 Thanked 0 Times in 0 Posts	starting problem i just installed my r6 headers put in a k and filter and have an hmf r6 exhaust system. i have the pcv installed and have the autotune. everything ran great. however i put everything back together put my plastics on and started the bike it ran for like 3 mins if that and just shut off.. now my bike wont even start. it just cranks and cranks and crack it may kick over once or twice but it wont start.. what could be the problem anyone have this problem yet ? pleas help

01-13-2010, 03:52 PM	#2 (permalink)
KADO Member Bike: 2009 FZ6R Black Raven Join Date: Aug 2009 Location: Louisiana Posts: 61 Thanks: 10 Thanked 7 Times in 7 Posts	Sounds like it may not be grounded all the way. Have u checked to make sure that the PC V is grounded? __________________ Intuitive No Cut Frame Sliders, Competition Werkes Fender Eliminator, Flushmount Front Turn Signals *Coming Soon- Two Brothers Full Exhaust, Painted Windscreen, Rim Accents*

01-13-2010, 05:21 PM	#4 (permalink)
FitZ6R Senior Member Bike: 2009 Yamaha FZ6R Join Date: Aug 2009 Location: Lehigh Valley, PA Posts: 425 Thanks: 72 Thanked 132 Times in 93 Posts	Where are ya in PA? __________________ Kent 2009 Raven FZ6R // Yamaha Raised Bubble Windscreen // T-Rex Racing Frame Sliders // Joe Rocket & Cortech Luggage

01-13-2010, 06:23 PM	#6 (permalink)
KADO Member Bike: 2009 FZ6R Black Raven Join Date: Aug 2009 Location: Louisiana Posts: 61 Thanks: 10 Thanked 7 Times in 7 Posts	what color lights show up on the power commander module when u try and start the bike? __________________ Intuitive No Cut Frame Sliders, Competition Werkes Fender Eliminator, Flushmount Front Turn Signals *Coming Soon- Two Brothers Full Exhaust, Painted Windscreen, Rim Accents*

01-13-2010, 06:42 PM	#10 (permalink)
KADO Member Bike: 2009 FZ6R Black Raven Join Date: Aug 2009 Location: Louisiana Posts: 61 Thanks: 10 Thanked 7 Times in 7 Posts	The only thing that I can thing of is that the connectors to the injectors by the fuel rail may be faulty or something of that nature but I could be completely wrong. __________________ Intuitive No Cut Frame Sliders, Competition Werkes Fender Eliminator, Flushmount Front Turn Signals *Coming Soon- Two Brothers Full Exhaust, Painted Windscreen, Rim Accents*

01-13-2010, 03:57 PM	#3 (permalink)
rsx2002 Junior Member Bike: 2009 fz6r Join Date: Dec 2009 Location: pa Posts: 18 Thanks: 0 Thanked 0 Times in 0 Posts	ya everything is grounded correctly. i had the bike started before i put the plastics back on..from putting the plastics on and starting it back up was less then 20 mins. its started up ran for like 2 mins then jsut shut off now it wont start....i didnt think it could be flooded but is that a possibility cause i can kinda smell fuel comin from the tail pipe...idk what else is would be if it started before now it dont..something dont add up...its ran ever since i put everything on...just after i put on the plastics it wont start ha..

01-13-2010, 05:30 PM	#5 (permalink)
rsx2002 Junior Member Bike: 2009 fz6r Join Date: Dec 2009 Location: pa Posts: 18 Thanks: 0 Thanked 0 Times in 0 Posts	clarion area.. im like 10mins from clarion and an hr from pittsburgh

01-13-2010, 06:29 PM	#7 (permalink)
rsx2002 Junior Member Bike: 2009 fz6r Join Date: Dec 2009 Location: pa Posts: 18 Thanks: 0 Thanked 0 Times in 0 Posts	green and the red blinks then goes out

01-13-2010, 06:36 PM	#9 (permalink)
rsx2002 Junior Member Bike: 2009 fz6r Join Date: Dec 2009 Location: pa Posts: 18 Thanks: 0 Thanked 0 Times in 0 Posts	well when i plug the pcv in everything is been read right when i hit the starter the rpm and duty % changes on the computer so i know everything is working correctly im just tryin to think of how its gettin flooded ?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Help Contribute to Yamaha FZ6R Forums - International FZ6R Motorcycle Community Forum
Please support and help grow this great community by donating to any of the below Goals
General [ Loading Progress Bar ] Donate Now