Listing of common torque specs for FZ6R - Yamaha FZ6R Forums - International FZ6R / XJ6 Motorcycle Community Forum

stevet · 07-09-2010, 09:11 AM

Does anyone have a listing of common torque specs for the FZ6R?

whatever · 08-03-2010, 06:05 PM

i will on the 6th when my manual shows up, if anybody needs specs post and i will answer your question.

whatever · 08-08-2010, 12:22 PM

upper shock bolt 36 ft lbs
lower shock bolt 39 ft lbs
upper handle bar 17 ft lbs
grip end 19 ft lbs
union bolt ft master cylinder 23 ft lbs
front brake caliper bolts 19 ft lbs
rear wheel sprocket bolts 57 ft lbs
rear axle 64 ft lbs
rear wheel brake disc 14 ft lbs
swingarm 79 ft lbs
front sprocket 61 ft lbs
left front engine mounting 40 ft lbs
right side engine front mounting 40 ft lbs
rear engine motor mounts 40 ft lbs
steering stem nut 79 ft lbs
triple tree upper pinch bolts 14 ft lbs
triple tree lower pinch bolts 22 ft lbs
fork cap bolt 17 ft lbs
damper rod bolt 16 ft lbs
lower handlebar holder nut 23 ft lbs
bolts for rear grap bar 11 ft lbs
front brake caliper mounting bracket 28 ft lbs
front brake calper 19 ft lbs
front brake disc 12 ft lbs
front axle 46 ft lbs
front wheel axle pinch bolt 13 ft lbs
brake line union bolt near master reservior 23 ft lbs
exhaust header flange nuts 14 ft lbs
muffler bolts left and right side 14 ft lbs

all on same piece foot rest assembly
2 at 39 ft lbs
3 at 21 ft lbs 1 at 16 ft lbs

whatever · 09-01-2010, 05:45 AM

here's the rest !

left side gusset plate 4 bolts 22 ft lbs
union bolt oil cooler 45 ft lbs
rear brake disc 14 ft lbs
oil fillter 12 ft lbs
drain bolt 31 ft lbs

**Diluted** · 09-02-2010, 10:26 AM

So I'm taking it the header exhaust flange nut is the for mounting the headers...are they really only mounted at 14ft lbs? That just seems low to me...

I have the service manual I just don't see anything for the headers in there. Would it be called something different?

Edit: I'm guessing Exhaust Pipe Nut in the service manual is them since it has a quantity of 8...and it is indeed 14ft lbs...

whatever · 09-02-2010, 12:35 PM

yes where the headers mount to the exhaust ports..... 14 ft lbs is tight enough because there are exhaust gaskets there.

couple mine were loose.... so good to check them with a 3/8 drive tq wrench if you have one.

07-09-2010, 09:11 AM	#1 (permalink)
stevet Senior Member Bike: 2009 fz6r Join Date: Jun 2010 Location: encinitas, ca Posts: 164 Thanks: 6 Thanked 66 Times in 40 Posts	Listing of common torque specs for FZ6R Does anyone have a listing of common torque specs for the FZ6R?

08-08-2010, 12:22 PM	#3 (permalink)
whatever Senior Member Bike: 09 white fz6r Join Date: Jul 2010 Location: ny Posts: 272 Thanks: 5 Thanked 19 Times in 18 Posts	upper shock bolt 36 ft lbs lower shock bolt 39 ft lbs upper handle bar 17 ft lbs grip end 19 ft lbs union bolt ft master cylinder 23 ft lbs front brake caliper bolts 19 ft lbs rear wheel sprocket bolts 57 ft lbs rear axle 64 ft lbs rear wheel brake disc 14 ft lbs swingarm 79 ft lbs front sprocket 61 ft lbs left front engine mounting 40 ft lbs right side engine front mounting 40 ft lbs rear engine motor mounts 40 ft lbs steering stem nut 79 ft lbs triple tree upper pinch bolts 14 ft lbs triple tree lower pinch bolts 22 ft lbs fork cap bolt 17 ft lbs damper rod bolt 16 ft lbs lower handlebar holder nut 23 ft lbs bolts for rear grap bar 11 ft lbs front brake caliper mounting bracket 28 ft lbs front brake calper 19 ft lbs front brake disc 12 ft lbs front axle 46 ft lbs front wheel axle pinch bolt 13 ft lbs brake line union bolt near master reservior 23 ft lbs exhaust header flange nuts 14 ft lbs muffler bolts left and right side 14 ft lbs all on same piece foot rest assembly 2 at 39 ft lbs 3 at 21 ft lbs 1 at 16 ft lbs Last edited by whatever; 08-16-2010 at 01:34 AM.

09-02-2010, 10:26 AM	#5 (permalink)
Diluted Super Moderator Bike: '09 FZ6R Join Date: Jul 2009 Location: Glen Burnie, Maryland Posts: 1,759 Thanks: 286 Thanked 333 Times in 247 Posts	So I'm taking it the header exhaust flange nut is the for mounting the headers...are they really only mounted at 14ft lbs? That just seems low to me... I have the service manual I just don't see anything for the headers in there. Would it be called something different? Edit: I'm guessing Exhaust Pipe Nut in the service manual is them since it has a quantity of 8...and it is indeed 14ft lbs... __________________ Chris iR Frame Sliders // Targa FE // 6000K HID // Clear Double Bubble // Spiegler SS Brake Lines Last edited by Diluted; 09-02-2010 at 10:43 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-03-2010, 06:05 PM	#2 (permalink)
whatever Senior Member Bike: 09 white fz6r Join Date: Jul 2010 Location: ny Posts: 272 Thanks: 5 Thanked 19 Times in 18 Posts	i will on the 6th when my manual shows up, if anybody needs specs post and i will answer your question.

09-01-2010, 05:45 AM	#4 (permalink)
whatever Senior Member Bike: 09 white fz6r Join Date: Jul 2010 Location: ny Posts: 272 Thanks: 5 Thanked 19 Times in 18 Posts	here's the rest ! left side gusset plate 4 bolts 22 ft lbs union bolt oil cooler 45 ft lbs rear brake disc 14 ft lbs oil fillter 12 ft lbs drain bolt 31 ft lbs

09-02-2010, 12:35 PM	#6 (permalink)
whatever Senior Member Bike: 09 white fz6r Join Date: Jul 2010 Location: ny Posts: 272 Thanks: 5 Thanked 19 Times in 18 Posts	yes where the headers mount to the exhaust ports..... 14 ft lbs is tight enough because there are exhaust gaskets there. couple mine were loose.... so good to check them with a 3/8 drive tq wrench if you have one.

Help Contribute to Yamaha FZ6R Forums - International FZ6R Motorcycle Community Forum
Please support and help grow this great community by donating to any of the below Goals
General [ Loading Progress Bar ] Donate Now