Windscreen Bolts - Yamaha FZ6R Forums - International FZ6R / XJ6 Motorcycle Community Forum

mchury · 02-25-2010, 08:16 AM

Just curious if anyone knew where i can get a few stock windscreen bolts for cheap. I need 2 thats it. The heads stripped out on them when i was taking the shield off to put my no fat chicks sticker on lol.

p.s. anyone got any they dont need and are willing to part with them i can take them off your hands.

Heineken · 02-25-2010, 08:40 AM

Quote:

Originally Posted by mchury

Just curious if anyone knew where i can get a few stock windscreen bolts for cheap. I need 2 thats it. The heads stripped out on them when i was taking the shield off to put my no fat chicks sticker on lol.

p.s. anyone got any they dont need and are willing to part with them i can take them off your hands.

If I can find them I'll give you mine you just have to pay for shipping, but it's cheaper to go to your ACE Hardware or any store that sells bolts and stuff and get the Stainless Steel ones, they just look better..... IMO

mchury · 02-25-2010, 11:28 AM

Quote:

Originally Posted by Heineken

If I can find them I'll give you mine you just have to pay for shipping, but it's cheaper to go to your ACE Hardware or any store that sells bolts and stuff and get the Stainless Steel ones, they just look better..... IMO

yea i would deff do that but i got the yellow and black and was wanting to stick with the black. i agree it looks good on your bike tho

JonKerr · 02-25-2010, 12:05 PM

There are plastic bolts on there for a reason. They'll break before the windscreen does in a crash. If the windscreen breaks, you've got big sharp pieces of plastic that could do a lot of damage to a rider. They're a safety feature.

Roaddawg · 02-25-2010, 12:32 PM

Quote:

Originally Posted by JonKerr

There are plastic bolts on there for a reason. They'll break before the windscreen does in a crash. If the windscreen breaks, you've got big sharp pieces of plastic that could do a lot of damage to a rider. They're a safety feature.

Interesting...didn't know that. Makes sense though.

mchury · 02-25-2010, 12:55 PM

that does makes sense. problem is when u take them out once, the heads stripp out. I called my local yami shop and for 4 bolts, 12 dollars. o well better than getting gutted by a piece of windscreen i guess.

**99vengeur** · 02-26-2010, 05:56 AM

How badly are the heads of the bolts stripped out? You could try to reform them. If you haven't removed a ton of the plastic, take a philips screwdriver and heat the tip up pretty hot. Then push it into the plastic to melt and reshape the head of the bolt. When the shape is right, dump ice cold water on it to set it and reharden the plastic. This might get you enough shape to get the bolts back in and tightened down.

travstoll · 02-26-2010, 08:41 AM

Quote:

Originally Posted by 99vengeur

How badly are the heads of the bolts stripped out? You could try to reform them. If you haven't removed a ton of the plastic, take a philips screwdriver and heat the tip up pretty hot. Then push it into the plastic to melt and reshape the head of the bolt. When the shape is right, dump ice cold water on it to set it and reharden the plastic. This might get you enough shape to get the bolts back in and tightened down.

99 is a friggen genius....

I was just at Westlake ACE hardware hardware buying some things....and they do sell a few plastic bolts btw....

mchury · 02-28-2010, 04:31 PM

i wish i would have read this a few days ago. Just went to the yami shop and paid 12 dollars for 4 new ones.

02-25-2010, 08:16 AM	#1 (permalink)
mchury Senior Member Bike: 2009 Yamaha FZ6R Join Date: Sep 2009 Location: Uniotown PA Posts: 170 Thanks: 32 Thanked 27 Times in 21 Posts	Windscreen Bolts Just curious if anyone knew where i can get a few stock windscreen bolts for cheap. I need 2 thats it. The heads stripped out on them when i was taking the shield off to put my no fat chicks sticker on lol. p.s. anyone got any they dont need and are willing to part with them i can take them off your hands. __________________ "your so drunk your prolly seeing double"..... "well i got 2 guns, one for each of ya"

02-25-2010, 12:05 PM	#4 (permalink)
JonKerr Senior Member Bike: Raven FZ6R Join Date: Jul 2009 Location: San Diego (Lakeside) Posts: 1,381 Thanks: 41 Thanked 372 Times in 223 Posts	There are plastic bolts on there for a reason. They'll break before the windscreen does in a crash. If the windscreen breaks, you've got big sharp pieces of plastic that could do a lot of damage to a rider. They're a safety feature. __________________ 2009 Raven FZ6R / Bridgestone BT-016 Tires / T-Rex No Cut Frame Sliders / Custombikeparts.com FE Kit / Yamaha R6S Mirrors / Lockhart Phillips Flushmounts / DDM HID Head Light Kit / Gorilla Cycle Alarm / Pro Grip 717 Grips / Pro Grip CF Tank Pad / StompGrip Universal Race Oval Grip Pads / "Pazzo" Black Shorty Levers / Yamaha Tinted Double Bubble Windscreen

02-25-2010, 12:55 PM	#6 (permalink)
mchury Senior Member Bike: 2009 Yamaha FZ6R Join Date: Sep 2009 Location: Uniotown PA Posts: 170 Thanks: 32 Thanked 27 Times in 21 Posts	that does makes sense. problem is when u take them out once, the heads stripp out. I called my local yami shop and for 4 bolts, 12 dollars. o well better than getting gutted by a piece of windscreen i guess. __________________ "your so drunk your prolly seeing double"..... "well i got 2 guns, one for each of ya"

02-26-2010, 05:56 AM	#7 (permalink)
99vengeur Administrator Bike: 2009 Yamaha FZ6R Join Date: Apr 2009 Location: Shreveport, LA Posts: 1,856 Thanks: 391 Thanked 430 Times in 281 Posts	How badly are the heads of the bolts stripped out? You could try to reform them. If you haven't removed a ton of the plastic, take a philips screwdriver and heat the tip up pretty hot. Then push it into the plastic to melt and reshape the head of the bolt. When the shape is right, dump ice cold water on it to set it and reharden the plastic. This might get you enough shape to get the bolts back in and tightened down. __________________ Robert 2009 Cadmium Yellow FZ6R//Intuitive Racing No-Cut Frame Sliders//Evotech Swingarm Spools//Two Brothers Racing V.A.L.E. Complete Carbon Fiber Exhaust//Two Brothers Racing JuiceBox//Driven AIS Blockoff Plates//Uscgduncan Fender Eliminator//Custom Garage Door Opener//Custom Painted Windscreen//Bi-xenon Projector Retrofit with Blue Angel Eye//More in the making...

02-28-2010, 04:31 PM	#9 (permalink)
mchury Senior Member Bike: 2009 Yamaha FZ6R Join Date: Sep 2009 Location: Uniotown PA Posts: 170 Thanks: 32 Thanked 27 Times in 21 Posts	i wish i would have read this a few days ago. Just went to the yami shop and paid 12 dollars for 4 new ones. __________________ "your so drunk your prolly seeing double"..... "well i got 2 guns, one for each of ya"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Help Contribute to Yamaha FZ6R Forums - International FZ6R Motorcycle Community Forum
Please support and help grow this great community by donating to any of the below Goals
General [ Loading Progress Bar ] Donate Now