Quote:
Originally Posted by 99vengeur
How badly are the heads of the bolts stripped out? You could try to reform them. If you haven't removed a ton of the plastic, take a philips screwdriver and heat the tip up pretty hot. Then push it into the plastic to melt and reshape the head of the bolt. When the shape is right, dump ice cold water on it to set it and reharden the plastic. This might get you enough shape to get the bolts back in and tightened down.
|
99 is a friggen genius....
I was just at Westlake ACE hardware hardware buying some things....and they do sell a few plastic bolts btw....